Electro-Harmonix Tone Tattoo Analog Multi-effects Pedal with Metal Muff Distortion, Neo Clone Chorus
Product highlights:
- All Analog multi-effect distortion, chorus, delay
- Delivers three EHX favorites in one compact pedal
- Crushing lead and rhythm tone
- Full tone sculpting, including two levels of scoop
- New Noise Gate for minimal noise
- Power adapter included
- Features a new noise gate for minimal noise
In the box
Electro-Harmonix Tone Tattoo Analog Multi-effects Pedal with Metal Muff Distortion, Neo Clone Chorus
- Electro-Harmonix Tone Tattoo Analog Multi-effects Pedal with Metal Muff Distortion, Neo Clone Chorus
- Power Adapter
Electro-Harmonix Tone Tattoo Analog Multi-effects Pedal with Metal Muff Distortion, Neo Clone Chorus
The Electro-Harmonix Tone Tattoo is the first fully-interactive, analog multi-effects pedal. Satisfy your tone jones with a chain that features the Metal Muff Distortion, Neo Clone Chorus, and Memory Toy Analog Delay. It delivers crushing Lead and Rhythm tones. It features full-tone sculpting, including two levels of scoop. It features a new noise gate for minimal noise, and with three critically acclaimed effects, it’s like a talisman for a great guitar.
Delay Knob and Feedback Knob
It controls the delay time, and the feedback knob controls the number of echoes repeats each note produces.
Treble Knob
The EQ control for the treble or high-frequency response of the Metal muff.
Bass Knob
It is the EQ control for the bass or low-frequency response of the Metal Muff.
Rate Knob and Scoop Switch
It controls the Neo Clones speed of modulation. The scoop switch provides two settings of attenuation in the middle-frequency range.
Blend Knob and Gain Knob
This knob mix dry signal coming with the delayed signal produced. The gain knob controls the input gain into the memory toy.
Depth
It changes the intensity, or depth, of the chorus effect by choosing between high and low depth.
Volume Knob and GATE Button
It controls the overall output volume of the Metal muff. The gate button enables the gate function of Metal MUFF. When the GATE button is enabled, the METAL MUFF LED is green.
Drive Knob and Gate Threshold Knob
It controls the amount of input gain. The gate Threshold knob controls the input amplitude needed to open the GATE.
In Jack
You can connect the output of your instrument or other effects pedal to the 1/4-Inch IN jack.
Out Jack
Through Out Jack connect the output of the tone Tattoo to the input of an amplifier or another effects pedal.
Memory Toy Footswitch and Status LED
The footswitch located nearest the OUT jack of the Tone Tatto toggles the memory toy effect on or off when the LED in the memory toy section is lit.
Neo Clone Footswitch and Status LED
It toggles the effect on or off. When the LED in the Neo Clone section is lit, the effect is active.