Ade Advanced Optics NUWA (RD3-021) Micro Red Dot Sight for Canik TP9 Elite SC, Canik Mete SFT, Sig S

Ade Advanced Optics NUWA (RD3-021) Micro Red Dot Sight for Canik TP9 Elite SC, Canik Mete SFT, Sig S

ADE Advanced Optics NUWA is the first and the only red dot with RMS and RMSc footprint that has a top battery loading system, no need to remove the sight to change the battery which requires re-sight in and waste ammo. Battery life is approximately 500 to 800 depending on the brightness setting. Hard-coated aircraft aluminum and multi-coated glass. Not a plastic body with a polymer lens.

Functional Design 

ADE Nuwa created an iron sight curve at the end of the body and also added two white dots on the curve. For the rear part of the red dot to become a backup iron sight. With the ultra-short design, the red dot provides a distance and gap on some full-size optics-ready pistols, to give enough distance to be a co-witness backup sight, in addition to the LED dot and pistol-equipped iron sight. For non-optics-ready pistols that need to use an optic plate and adapter to replace the pistol manufacturer-equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for co-witness. ADE Nuwa is manually activated by pressing the on or off switch. Press and hold the switch for 2 seconds to turn on/off, and quickly press to adjust the brightness from low to high. 

Compatibility

Comes with 3 pairs of screws for Sig P365XL/X, Springfield Hellcat OSP, and Canik TP9 Elite SC only. The provided screws might not work with every compatible pistol listed. ADE makes the red dot accept the industrial standard footprint. The pistol manufacturer makes the optic cut or slide for the same footprint, but they have their own opinions on deciding which type of screws the screw holes take. ADE Does not know the screw specs every pistol manufacturer uses for their screw hole. Please ask the pistol manufacturer what screw specs they used on the hole and ask them to provide the screw. If you can’t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size. ADE RD3-006B, RD3-009, RD3-012, RD3-013, and RD3-028 fit optic cut plate that is compatible with Vortex Venom, Burris Fastfire, and doctor footprint. ADE RD3-018 Spike, RD3-021 Nuwa, and RD3-030 Apollo fit optic cut/optic plate that is compatible with shield RMS, RMSC, and Deltapoint Pro footprint. ADE RD3-019 Stingray RD3-020 Raptor, RD3-023 Valkyrie, and RD3-029 Trumpet fit optic cut/optic plate/ that is compatible with Trijicon RMR, SRO and Holosun 407C and 507C footprint

Pocket Friendly

ADE Advanced Optics first made its appearance in the firearms accessory industry by doing private label production for several major manufacturers and retailers. During this period, Ade Advanced Optics began receiving requests from numerous customers for access to the affordable, high-quality products that Ade Advanced Optics was capable of producing. By soliciting feedback from both clients and end users in 2010, Ade Advanced Optics was able to overcome the challenges a new company often faces when entering a global market and industry, especially one as competitive as the shooting, hunting, and outdoors industry.